Biasi have a range of flueing options that will allow you to site your boiler almost anywhere within your property.
Horizontal Concentric Flue or standard flue is a pipe in pipe system that brings air in from the outside via the outer pipe and takes the exhaust gases out via the inner pipe.
Vertical Flue uses the same concentric system but has the outlet going through the roof, ideal if you are looking to site your boiler in an upstairs cupboard for example.
Twin Flue systems are available should you need to site your boiler a greater distance from any outside walls and cannot go vertical; this system can give you up to 40 metres in total.
Plume Management Kits are available to help move the outlet of the 'plume' that is produced by todays high efficiency boilers, these are required when the flue outlet is close to a neighbouring property or walk way.
It is vitally important that the correct Biasi Flue is used for Biasi boilers, the maximum length can vary from model to model so please check this before deciding which range to buy.
|Biasi Code||Description||Inovia||Advance Plus||Riva Plus|
|10999.0387.1||Standard Horizontal Flue Kit||Y||Y||Y|
|10999.0388.1||HE Hztl FLue Extn 60-100mm 1m||Y||Y||Y|
|10999.0928.0||HE Hztl FLue Extn 60-100mm 2m||Y||Y||Y|
|10999.0319.0||Support Bracket for 100mm Flue||Y||Y||Y|
|10999.0390.1||HE 90Deg Elbow 60-100mm||Y||Y||Y|
|10999.0391.1||HE 45 Deg Elbow 60-100mm||Y||Y||Y|
|10999.0389.1||HE Raised Horizontal Flue Kit (Kit 2)||Y||Y||Y|
|10999.0392.1||HE Vert Flue 80/125mm 1.2m (Kit 3)||Y||Y||Y|
|10999.0407.1||HE Vert Ext 80/125mm 1m||Y||Y||Y|
|10999.0320.0||Support Bracket for 125mm Flue||Y||Y||Y|
|10999.0408.1||HE 90 Deg Elbow 80/125mm||Y||Y||Y|
|10999.0409.1||HE 45 Deg Elbow 80/125mm||Y||Y||Y|
|10999.0252.1||Roofing-Tile Kit 125mm||Y||Y||Y|
|10999.0280.1||Flat Roof Flashing Plate 125mm||Y||Y||Y|
|10999.0393.1||HE Twin Flue Splitting Kit 80mm||Y||Y||N|
|10999.0394.1||HE Ext Pipe for Twin Flue 80mm 1m||Y||Y||N|
|10999.0318.0||Support Bracket for 80mm Flue||Y||Y||N|
|10999.0395.1||HE 90 Deg M-F Elbow for Twin Flue||Y||Y||N|
|10999.0396.1||HE 45 Deg M-F Elbow for Twin Flue||Y||Y||N|
|10999.0557.0||Pluming Extension 60mm 1m||Y||Y||Y|
|10999.0558.0||Pluming Elbow 90 Deg 60mm||Y||Y||Y|
|10999.0559.0||Pluming Elbow 45 Deg 60mm||Y||Y||Y|
|10999.1077.0||Plume Management Kit||Y||Y||N|
|10999.1078.0||Plume Management Extension||Y||Y||N|
|BI1665107||Outside Temp Probe||Y||Y||N|
|10999.0929.0||External Pressure Gauge||Y||Y||Y|
|10999.0822.1||Stand Off Bracket||Y||Y||N|
|10999.0431.0||Stand Off Bracket||N||N||Y|
|BI1293500||LPG Kit 16KW and 25KW||Y||Y||N|
|BI1363500||LPG Kit 30KW and 35KW||Y||Y||N|
|BI1293500||LPG Kit 24KW||N||N||N|
|BI1293501||LPG Kit 32KW||N||N||N|
|KI1064506||LPG Kit 24KW and 28KW||N||N||Y|
All Biasi Accessories come with a 12 month warranty. No third party costs associated with changing the accessory are covered by our warranty.
Only genuine Biasi Flue Accessories should be used with Biasi Boilers and only fitted by gas safe competent installers. Please see our find an installer page for installers in your area.